Free Websites at Nation2.com

Various Sorts of Welding

Various Sorts of Welding

There are many different kinds of welding that can be used to join materials together. I'm going to be referring to the welding of metal to metal and steel to steel.

The most frequent forms welding are:

Wire feed welding - which some people contact mig, mag, gasless or flux cored.
Arc welding - also called stick welding
Tig welding -
Gas welding
Spot welding
Wire feed welding is also generally known as MIG welding. The appropriate term is GMAW or Gas Metal Arc Welding. When you use this welding technique you possess a torch or gun in your hand and squeeze a trigger. Whenever you squeeze the trigger, wire inside torch are going to turn out. This wire will be pointed at what you would like to weld.

The technical name for arc welding is SMAW or MMAW. That is Shielded or Manual Metal Arc Welding. This time you have an electrode which is simply a length of filler wire that is certainly normally about 1 foot long and it is covered within a flux. When you make use of the rod the flux will burn off and make up a shielding gas that protects the weld.



Tig welding is a very fine and delicate welding technique. With this you need to hold you torch in a hand and make use of a filler rod inside the other. The thought is basically that you slowly feed the filler rod in to the weld as you go along. It is possible to weld with TIG or GTAW, Gas Tungsten Arc Welding without needing the filler rod and just melt the 2 components of metal together. This is what's called "fusing", where using the heat from arc you melt and fuse it together.

As well as the last different form of welding you have is named "spot welding". This can be employed for sheet metal fabrications. In a nut shell both the components of metal that need to be joined are placed relating to the electrodes on the ends of the arms with the unit. They are available together and also the welded part will probably be between those points. It is merely often a second approximately for this to happen. Merely a buzz and done. It is a very quickly means of joining sheet metal parts. Such things as toolboxes make the perfect demonstration of so what can be and they are spot welded.

There are also many other a variety of welding systems for metal like friction, ultrasonic, thermite and sub arc simply to name a few.

But by far those stated earlier will be the most common today.

More info about Khuon han tiep dia please visit web portal: this.